How To Put On Lifeproof Case Iphone Xr

Download Article

Download Article

A Lifeproof case is a tablet or smartphone example designed to withstand liquid, clay, and high drops. If you lot accept one of these cases, it may take saved your device more than in one case! They are able to do this because of their material and snug fit. And they're great—until it'southward time to take them off! You cannot remove a Lifeproof case the aforementioned manner you practise a typical phone case. Brand sure you do so carefully so that y'all can preserve it for future apply.

1. 1

   Open the accuse port door on the bottom of the phone or tablet. Some lifeproof cases will take a charger port that opens at a swivel at the bottom of the telephone. Use your fingernail to open the charge port door.^[ane]

   • Non-waterproof cases may non have a charge port door. If your telephone doesn't, y'all can skip this step.

2. 2

   Locate the small slot next to the charger port. This is a thin slot about two cm thick. It is most likely located on the right side of the charger role when your phone is facing up. This slot is where you lot can put the case key. That will permit for easy removal.^[2]

   • Some phones may accept 2 slots, one on each side on the bottom.

   Advertisement

3. 3

   Insert the case key in the slot to dissever the example. Your lifeproof phone case came with a minor thin slice of plastic used to dissever the front and back of the case. The slot is located on the bottom correct corner. Insert the instance central into the slot and twist information technology to begin separating the instance. So, slide it up the side of the phone to further separate the top and bottom of the case.^[3]

   • Continue to practise this very gently until yous hear a click. This click indicates the dorsum and front portions of the instance take separated.
   • If your phone has ii slots, repeat this stride on the other slot.
   • If y'all do non accept the case central, you can use any coin to put in the slot.

4. 4

   Insert your thumb between the example to completely separate it. One time you have used your example key or coin to separate the case, put your thumb betwixt the gap. Then yous tin carefully motion it around the case until the back is completely removed.^[iv]

   • You should hear another click when the other side of the latch opens.

Advertisement

1. 1

   Put your telephone on a soft surface. When you remove your phone from the example, it may fall when it pops out. Information technology'south best to play it safe and consummate the next steps on a soft surface area, such as a bed or couch.^[5]

2. two

   Utilise pressure to the front end of the example with your thumbs. Plough your telephone so that the screen is facing up. Use the surface of your thumbs to gently press on the screen. Endeavour to exercise this in the middle of the case.^[6]

3. 3

   Pull the sides of the case up until information technology clicks. While your thumbs are on the screen, use your other fingers to pull the sides of the example up. When you hear a click, that means your phone is separated from the case.

   • At this point, your phone should easily popular out of the example.^[vii]

Ad

Add New Question

• Question

  How do I put on a Lifeproof example for an iPhone?

  

  It should come up with instructions, merely if it didn't, you could bank check the website.

• Question

  If I sweat on my phone, will information technology impairment it?

  

  Due to the fact that the life proof example is waterproof (and hence other liquid proof), it should be fine.

• Question

  Is the example even so good even after you take it off?

  

  Yes.

• Question

  How do I remove the Lifeproof example from an iPad Air 2?

  

  Place a dime in the slot on either side of the charge port door and twist gently merely firmly. You lot should hear the latches releasing every bit y'all inch forrard to release the unabridged encompass.

• Question

  How practise I plug in headphones to a Lifeproof example?

  

  The case should come with a headphone adapter. If information technology didn't, purchase a Lifeproof headphone adapter.

• Question

  How do I replace a lifeproof example?

  

  Go on the website and discover the warranty link.

• Question

  Is the example still waterproof when I put it back on?

  

  Provided it is sealed correctly, the instance will be waterproof fifty-fifty after taking it off and putting it on again. Make sure all the edges are squeezed together tightly to ensure it is properly airtight. Besides, make sure the charger and headphone ports are closed correctly.

• Question

  How do I clean my iPhone lifeproof case?

  

  They're water proof, then I often only wash information technology in the sink. Just some soap and water seems to do the fox.

• Question

  The penny method doesn't work. Practise you take any other suggestions?

  

  Use a knife. Manifestly do this abroad from yourself, and don't pull the knife upward too fast!

• Question

  How can I clean the life proof case?

  

  They're water proof, and so you can just launder it in your sink with soap and water. Or, if y'all desire to be on the safer side, buy the liquid spray used to make clean screens.

Show more answers

Enquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Ad

• Always wash your hands earlier taking off the LifeProof case. It volition help avoid getting dirt and oil on your iPhone and case.

Thanks for submitting a tip for review!

Advertisement

• Never peel or pull off the LifeProof case at a sharp angle. The plastic will be weaker when information technology is in the process of beingness removed. If you break any of the small latches on the height or sides of the instance, it will no longer exist waterproof.

Advertisement

Things You'll Demand

• Case key or coin

Most This Article

Thanks to all authors for creating a page that has been read one,691,443 times.

Is this article up to date?

Source: https://www.wikihow.com/Take-Off-a-Lifeproof-Case

Share this post